Press the button.
A Check Control message is displayed.
If the trip is resumed within approx. 15 minutes
after an intermediate stop, the heated steering
wheel activates automatically if the function was
switched on at the end of the last trip.
The following settings can be stored and, if nec‐
essary, retrieved using the memory function:
▷ Seat position.
▷ Exterior mirror position.
▷ Height of the Head-up Display.
Two memory locations with different settings
can be set for each driver profile, refer to
The following settings are not stored:
▷ Backrest width.
▷ Lumbar support.
Using the memory function while driving can
lead to unexpected seat or steering wheel
movements. Vehicle control could be lost.
There is a risk of accident. Only retrieve the
memory function when the vehicle is stationary.
There is a risk of jamming when moving the
seats. There is a risk of injury or risk of damage
to property. Make sure that the area of move‐
ment of the seat is clear prior to any adjust‐
The memory buttons are located on the driver's
Set the desired position.
Press the button. The writing on the
button lights up.
3. Press desired button 1 or 2 while the LED is
lit. A signal sounds.
Calling up settings
The stored position is called up automatically.
Press the desired button 1 or 2.
The procedure stops when a switch for setting
the seat is pressed or one of the memory but‐
tons is pressed again.
Once underway, adjustment of the seat position
on the driver's side is disabled after a short while.
Seats, mirrors, and steering wheel
Online Edition for Part no. 01402779051 - II/19