Standby state and drive-
The letters OFF in the tachome‐
ter indicate that drive-ready state
is switched off and standby state
is switched on.
The letters READY in the tach‐
ometer indicate that the Auto
Start/Stop function is ready to
start the engine automatically.
For further information, see Idle state, standby
state, and drive-ready state, refer to page 41.
▷ Cold engine: the pointer is at
the low temperature end.
Drive at moderate engine and
▷ Normal operating tempera‐
ture: the pointer is in the mid‐
dle or in the lower half of the
▷ Hot engine: the pointer is at the high end of
the temperature range. In addition, a Check
Control message is displayed.
To check the coolant level, refer to page 299.
Indicator light in the instrument
A red indicator light is displayed.
If the indicator drops to +37 ℉/+3 ℃ or lower, a
A Check Control message is displayed.
There is an increased risk of ice on roads.
Even at temperatures above +37 ℉/+3 ℃
there can be a risk of icy roads, for instance on
bridges or shady sections of the road. There is
a risk of accident. Modify your driving style to
the weather conditions at low temperatures.
The time is displayed in the instrument cluster.
Setting the time and time format, refer to
The range indicates the distance that can still be
covered with the current fuel level.
The estimated range available with the remaining
fuel is permanently displayed in the instrument
With a low remaining range, a Check Control
message is briefly displayed. With a dynamic
driving style, for instance fast cornering, the en‐
gine function is not always ensured.
The Check Control message appears continu‐
ously below a range of approx. 30 miles/50 km.
Online Edition for Part no. 01402779051 - II/19