2019 BMW 3 Series Sedan — Owner's Manual – Page #208

Posted on 21 Feb, 2020
Model: 2019 BMW 3 Series Sedan
Pages: 342


File size: 7 MB

Download Manual

Online Viewer
The driver controls driving the vehicle via accel‐
erator pedal and brake.
Functional requirement
Drive forward without interruption to store the
route.
A maximum of 165 ft/50 m will be stored.
To store the route, do not exceed a driving
speed of 22 mph/36 km/h.
The return route must be at least
12 in./30 cm wider than your vehicle.
Driving back with automated
steering
1.
Press the park assistance button or shift into
reverse gear when the vehicle is stationary
and the drive-ready state is switched on.
2. Move the Controller to the right.
3. "Reversing Assistant"
The system takes over the steering.
The possible route is shown on the Control
Display.
4. Take your hands off the steering wheel and
carefully drive off with the accelerator pedal
and the brake.
When driving in reverse, observe the vehicle's
surroundings and pay attention to the infor‐
mation from the PDC. Brake, if necessary.
5. Follow the instructions on the Control Display
where required.
6. Stop no later than when normal traffic is
reached and take control of the vehicle, such
as by shifting to a forward gear.
At the end of the stored route, a signal will
sound and a request will be displayed, also
with the instruction to take control of the ve‐
hicle.
Terminating the system
The system is interrupted automatically in the
following situations:
If the driver grasps the steering wheel or
takes over steering.
When engaging a forward gear.
After a few minutes when the vehicle is sta‐
tionary.
If the vehicle leaves the stored lane during re‐
versing; for example, at the maximum steer‐
ing angle.
Limits of the back-up assistant
When you reach normal road traffic or if you
suddenly encounter an obstacle, stop imme‐
diately and take over control of the vehicle.
The maximum speed for driving in reverse is
limited to approximately 6 mph/9 km/h.
System limits
Safety information
Warning
The system is designed to operate in certain
conditions and circumstances. Due to condi‐
tions or other factors, the system may not re‐
spond. There may be a risk of accident or risk
of damage to property. Actively intervene as
warranted. Refer to the information in this Own‐
er’s Manual regarding the scope of the sys‐
tem’s operation and limitations.
No parking assistance
The parking assistant does not offer assistance
in the following situations:
In tight curves.
For diagonal parking spaces.
Functional limitations
The system may not be fully functional in the fol‐
lowing situations:
On bumpy road surfaces such as gravel
roads.
Seite 208
CONTROLS
Driver assistance systems
208
Online Edition for Part no. 01402779051 - II/19

Use of Cookies    Contact us