Control elements on the interior
▷ Buttons, arrow 1.
▷ LED, arrow 2.
▷ The hand-held transmitter, arrow 3, is re‐
quired for programming.
The battery of the hand-held transmitter must be
fully charged at the time of programming to en‐
sure an optimal range of the integrated universal
Switch on standby state.
2. Initial setup:
Press and hold the two outer buttons on the
interior mirror simultaneously for approxi‐
mately 10 seconds until the LED flashes
green rapidly. This erases all programming of
the buttons on the interior mirror.
3. Press the interior mirror button to be pro‐
grammed. The LED on the interior mirror will
slowly begin flashing orange.
4. Hold the hand-held transmitter for the system
to be used approx. 1 to 12 in/2.5 to 30 cm
away from the buttons on the interior mirror.
The required distance depends on the hand-
5. Press and hold the button of the desired
function on the hand-held transmitter.
Canada: if programming with the hand-held
transmitter was interrupted, hold down the in‐
terior mirror button and repeatedly press and
release the hand-held transmitter button for
▷ The LED lights up green: programming
Release the button.
▷ The LED flashes fast: programming is not
Press the button on the interior mirror for
2 seconds and release. Perform this pro‐
cedure three times to complete the pro‐
If the integrated universal remote control
remains nonoperational, continue with the
special features for change code wireless
▷ LED does not flash green after 60 sec‐
onds: programming not completed.
Repeat steps 3 to 6.
To program other functions on other buttons, re‐
peat steps 3 to 5.
Special feature of the rolling code
If you are unable to operate the remote-control‐
led system after repeated programming, please
check if the system to be controlled features a
rolling code radio system.
Refer to the owner's manual for the system.
For systems with a rolling code radio system, the
integrated Universal Remote Control and the
system also have to be synchronized.
Please read the owner's manual to find out how
to synchronize the system.
Synchronizing is easier with the aid of a second
Online Edition for Part no. 01402779051 - II/19