2019 BMW 3 Series Sedan — Owner's Manual – Page #244

Posted on 21 Feb, 2020
Model: 2019 BMW 3 Series Sedan
Pages: 342

File size: 7 MB

Download Manual

Online Viewer
Things to remember when driving
Vehicle features and
This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features that are not necessarily
available in your vehicle, for instance, due to the
selected options or country versions. This also
applies to safety-related functions and systems.
When using these functions and systems, the
applicable laws and regulations must be ob‐
Breaking-in period
General information
Moving parts need to begin working together
The following instructions will help you to ach‐
ieve a long vehicle life and good efficiency.
During break-in, do not use the Launch Control,
refer to page 124.
Safety information
Due to new parts and components, safety and
driver assistance systems can react with a de‐
lay. There is a risk of accident. After installing
new parts or with a new vehicle, drive conser‐
vatively and intervene early if necessary. Ob‐
serve the break-in procedures of the respective
parts and components.
Engine, transmission, and axle
Up to 1,200 miles/2,000 km
Do not exceed the maximum engine and road
For gasoline engine 4,500 rpm and
100 mph/160 km/h.
Avoid full load or kickdown under all circumstan‐
From 1,200 miles/2,000 km
The engine and vehicle speed can gradually be
Tire traction is not optimal due to manufacturing
circumstances when tires are brand-new; they
achieve their full traction potential after a break-in
Drive conservatively for the first
200 miles/300 km.
Brake system
Brake discs and brake pads only reach their full
effectiveness after approx. 300 miles/500 km.
Drive moderately during this break-in period.
Following part replacement
Observe the break-in procedures again, if com‐
ponents mentioned above are replaced.
Seite 244
Things to remember when driving
Online Edition for Part no. 01402779051 - II/19

Other Manuals

Use of Cookies    Contact us