▷ Lift the vehicle using suitable means.
▷ Do not lift or secure the vehicle by its tow
fitting, body parts, or suspension parts.
Pushing the vehicle
To remove a broken-down vehicle from the dan‐
ger area, it can be pushed for a short distance.
For rolling or pushing the vehicle, refer to
The vehicle should only be transported on a
Towing other vehicles
Switch on the hazard warning system, depend‐
ing on local regulations.
If the electrical system has failed, clearly identify
the vehicle being towed by placing a sign or a
warning triangle in the rear window.
If the approved gross vehicle weight of the tow‐
ing vehicle is lighter than the vehicle to be
towed, the tow fitting can tear off or it will not
be possible to control the vehicle's response.
There is a risk of accident. Make sure that the
gross vehicle weight of the towing vehicle is
heavier than the vehicle to be towed.
If the tow bar or tow rope is attached incor‐
rectly, damage to other vehicle parts can occur.
There is a risk of damage to property. Correctly
attach the tow bar or tow rope to the tow fitting.
The tow fittings used should be on the same
side on both vehicles.
Should it prove impossible to avoid mounting the
tow bar at an offset angle, please follow the fol‐
▷ Maneuvering capability is limited going
▷ The tow bar will generate lateral forces if it is
secured with an offset.
When starting to tow the vehicle, make sure that
the tow rope is taut.
Use nylon ropes or straps, which will enable the
vehicle to be towed without jerking.
The screw-in tow fitting should always be carried
in the vehicle.
Online Edition for Part no. 01402779051 - II/19