Overview
Button in the vehicle
SETUP
Programs
Program Distribution of driving forces
"4WD" Front and rear axles.
"4WD
SPORT"
Front and rear axles.
Main component, rear axle.
"2WD" Rear axle.
A program is activated automatically in the fol-
lowing situations:
▷
When the drive-ready state is switched on:
"4WD".
▷ When the M Dynamic Mode is activated:
"4WD SPORT".
▷ When the Dynamic Stability Control is acti-
vated: "4WD".
Selecting a program
General information
Changing programs in dynamic driving situa-
tions is not possible.
Using the button
Press the button and select the de-
sired program on the Control Display.
Via iDrive
It is possible to configure the required program
for buttons M1 or M2.
1. "CAR"
2. "M menu"
3. "Configure M1" or "Configure M2"
4. If necessary, deactivate the Dynamic Sta-
bility Control.
5. "M xDrive"
6. Select the desired program.
The setting is immediately applied with ac-
tive M1 or M2 configuration.
To activate the desired configuration with the
selected settings, press the corresponding but-
ton on the steering wheel:
▷
▷
Seite 220
CONTROLS
Driving stability control systems
220
Online Edition for Part no. 01405A5FA51 - VI/22