▷ When selector lever position D is disen‐
▷ When DTC is activated.
▷ When DSC is actively controlling stability.
▷ If the safety belt is unbuckled and the driv‐
er's door is opened while the vehicle is
▷ If the detection range of the camera is im‐
paired, for instance by soiling, heavy pre‐
cipitation or glare effects from the sun.
▷ After a longer stationary period when the
vehicle has been braked to a stop by the
Setting the speed
Maintaining/storing the speed
Press the rocker switch while the system is in‐
When the system is switched on, the current
speed is maintained and stored as the desired
The stored speed is displayed in the speedom‐
eter and briefly in the instrument cluster, refer
to page 134.
DSC will be switched on, if needed.
The speed can also be stored by
pressing a button.
Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the
road is clear.
▷ Each time the rocker switch is pressed to
the point of resistance, the desired speed
increases or decreases by approx.
1 mph/1 km/h.
▷ Each time the rocker switch is pressed
past the point of resistance, the desired
speed increases or decreases by a maxi‐
mum of 5 mph/10 km/h.
Hold the rocker switch in position to repeat the
The system does not release from the
personal responsibility. Due to the system lim‐
its, braking can be late. There is a risk of acci‐
dents or risk of property damage. Be aware to
the traffic situation at all times. Adjust the dis‐
tance to the traffic and weather conditions and
maintain the prescribed safety distance, possi‐
bly by braking.◀
Driving comfort Controls
Online Edition for Part no. 01 40 2 974 556 - X/16