1. Raise the head restraint up against the re‐
2. Press button, arrow 1, and pull the head re‐
straint out completely.
Seat and mirror memory
Two driver's seat and exterior mirror positions
can be stored per driver profile, refer to
page 44, and called up. Settings for the back‐
rest width and lumbar support are not stored in
Using the memory function while driving
can lead to unexpected movements of the
seat. Vehicle control could be lost. There is a
risk of an accident. Only retrieve the memory
function when the vehicle is stationary.◀
There is a risk of jamming when moving
the seats. There is a risk of injury or risk of
property damage. Make sure that the area of
movement of the seat is clear prior to any ad‐
1. Switch on the ignition.
2. Set the desired position.
Press button. The LED in the but‐
ton lights up.
4. Press selected button 1 or 2 while the LED
is lit. The LED goes out.
Button was pressed inadvertently:
Press button again.
The LED goes out.
Calling up settings
The stored position is called up automatically.
Press selected button 1 or 2.
The procedure stops when a switch for setting
the seat or one of the memory buttons is
While driving, the seat position adjustment on
the driver's side is interrupted after a short
Calling up of a seat position
After a brief period, calling up stored seat posi‐
tions is deactivated to save battery power.
To reactivate calling up of a seat position:
▷ Open or close the door or tailgate.
▷ Press a button on the remote control.
▷ Press the Start/Stop button.
Online Edition for Part no. 01 40 2 974 556 - X/16