In idle position: turn switch downward, arrow 3.
The switch automatically returns to its idle po‐
sition when released.
Fold-away position of the wipers
The wipers can be folded away from the wind‐
shield in the fold-away position.
Important, e.g., when changing the wiper
blades or when folding out under frosty condi‐
If the wipers start moving in the folded
away state, body parts can be jammed or dam‐
age may occur to parts of the vehicle. There is
a risk of injury or risk of property damage.
Make sure that the vehicle is switched off
when the wipers are in the folded away state
and the wipers are folded in when switching
If the wipers are frozen to the windshield,
the wiper blades can be torn off and the wiper
motor can overheat when switching on. There
is a risk of property damage. Defrost the wind‐
shield prior to switching the wipers on.◀
Folding away the wipers
Switch the ignition on and off again.
2. With frosty conditions, make sure that the
blades are not frozen to the windshield
3. Press the wiper lever up beyond the point
of resistance and hold it for approx. 3 sec‐
onds, until the wipers remain in a nearly
4. Fold the wipers all the way away from the
Folding down the wipers
After the wipers are folded back down, the
wiper system must be reactivated.
Fold the wipers back down onto the wind‐
2. Switch on the ignition.
3. Push wiper lever down. Wipers return to
their resting position and are ready again
All washer nozzles are supplied from one res‐
Use a mixture of tap water and windshield
washer concentrate. If desired, a windshield
washer concentrate containing antifreeze can
Recommended minimum fill quantity:
0.2 US gal/1 liter.
Some antifreeze agents can contain
harmful substances and are flammable. There
is a risk of fire and a risk of injury. Observe the
instructions on the containers. Keep antifreeze
Online Edition for Part no. 01 40 2 974 556 - X/16