2023 BMW X2 Owner's Manual (Page 119 of 308)

2023 BMW X2 Owner's Manual
Posted on 6 Jul, 2022
Model: 2023 BMW X2
Pages: 308
File size: 5 MB

Get Manual

Online Viewer
With some transmission versions, the proce-
dure for unlocking is as follows:
1. Press the Start/Stop button three times in a
row.
2. Press and hold down brake pedal.
3. Press the button on the selector lever, ar-
row 1, and press and hold the selector lever
into selector lever position N, arrow N, until
selector lever position N is displayed in the
instrument cluster.
A Check Control message is displayed.
4. Release the selector lever.
5. Release the brake.
6. Maneuver the vehicle from the hazardous
area and secure it against rolling away.
For additional information, see the chapter on
tow-starting and towing.
Steptronic Sport transmission:
Launch Control
Principle
Launch Control enables optimum acceleration
on roads with good traction under dry sur-
rounding conditions.
General information
The use of Launch Control causes premature
component wear since this function represents
a very heavy load for the vehicle.
Do not use Launch Control during the break-in,
refer to page 216.
To drive off with Launch Control, point the
front wheels straight forwards.
Functional requirements
Launch Control is available as soon as the en-
gine and transmission are at operating tem-
perature.
Depending on the outside temperature and
driving style, the engine and transmission re-
quire an interrupted trip of up to
30 miles/50 km in order to reach the operating
temperature needed for Launch Control.
Start with launch control
While the engine is running:
1. Press the button and select
SPORT with the Driving Dynamics Control.
TRACTION is displayed in the instrument
cluster in combination with SPORT and the
DSC OFF indicator light lights up.
2. Engage selector lever position S.
3. With the left foot, forcefully press down on
the brake.
4. Press and hold down the accelerator pedal
beyond the resistance point at the full throt-
tle position, kickdown.
A destination flag is displayed in the instru-
ment cluster.
5. The starting engine speed adjusts. Wait
briefly until the engine speed is constant.
Keep accelerator pedal in this position.
6. Release the brake within 3 seconds after
the destination flag illuminates.
The vehicle accelerates.
Upshifting occurs automatically as long as
the destination flag is displayed and the ac-
celerator pedal is not released.
Repeated use during a trip
After Launch Control has been used, the trans-
mission must cool down for approx. 5 minutes
before Launch Control can be used again.
After using Launch Control
To support driving stability, reactivate Dynamic
Stability Control.
System limits
An experienced driver may be able to achieve
better acceleration values in DSC OFF mode.
Seite 119
Driving
CONTROLS
119
Online Edition for Part no. 01405A540A1 - II/22


General
Year 2023
Make BMW
Model X2
Language English
Pages 308
Filetype PDF (Download)
File size 5 MB
2023 BMW X2 Manuals

Privacy Policy    Contact us