2023 BMW X2 Owner's Manual (Page 146 of 308)

2023 BMW X2 Owner's Manual
Posted on 6 Jul, 2022
Model: 2023 BMW X2
Pages: 308
File size: 5 MB

Get Manual

Online Viewer
3. "Tire Pressure Monitor"
4. Start the engine but do not drive off.
5. Reset tire pressure: "Perform reset".
6. Drive away.
The wheels are displayed in gray and the fol-
lowing is displayed "Resetting Tire Pressure
Monitor…".
After a travel time of several minutes, the set
tire inflation pressures are accepted as refer-
ence values. The reset is completed automati-
cally while driving.
After a successfully completed reset, the
wheels on the Control Display are shown in
green and "Tire Pressure Monitor active. See
label for recommended pressures." is dis-
played.
You may interrupt this trip at any time. When
you continue driving the reset resumes auto-
matically.
Messages
General information
When a flat tire is indicated, the Dynamic Sta-
bility Control may be turned on.
Safety information
Warning
A damaged regular tire with low or missing
tire inflation pressure impacts handling, such
as steering and braking response. Runflat
tires can maintain limited stability. There is a
risk of accident. Do not continue driving if the
vehicle is equipped with normal tires. Follow
the information on runflat tires and continued
driving with these tires.
If a tire inflation pressure check is
required
Message
An icon with a Check Control message appears
on the Control Display.
Icon Possible cause
The system has detected a wheel
change, but no reset was done.
No reset was performed for the sys-
tem. The system issues a warning
based on the tire inflation pressures
stored during the last reset.
Inflation was not carried out accord-
ing to specifications.
The tire inflation pressure has fallen
below the level of the last reset.
Measure
1.
Check the tire pressure and correct as
needed.
2. Reset the system.
If the tire inflation pressure is too low
Message
A yellow warning light is illuminated in
the instrument cluster.
In addition, an icon with a Check Control mes-
sage appears on the Control Display.
Icon
Possible cause
There is a tire pressure loss.
No reset was performed for the sys-
tem. The system issues a warning
based on the tire inflation pressures
stored during the last reset.
Seite 146
CONTROLS
Safety
146
Online Edition for Part no. 01405A540A1 - II/22


General
Year 2023
Make BMW
Model X2
Language English
Pages 308
Filetype PDF (Download)
File size 5 MB
2023 BMW X2 Manuals

Privacy Policy    Contact us