▷ Only use accessories that have been de‐
termined to be safe for attachment to a
▷ Do not use any accessories, for instance
pillows, while driving.
Adjusting the height
▷ To lower: press the button, arrow 1, and push
the head restraint down.
▷ To raise: push the head restraint up.
After setting the height, move the head restraint
up or down slightly, making sure it engages
Adjusting the distance
▷ Back: press the button and push the head re‐
straint toward the rear.
▷ Forward: pull the head restraint toward the
After setting the distance, move the head re‐
straint forward or backward slightly, making sure
it engages properly.
Only remove the head restraint if no one will be
sitting in the seat in question.
1. Raise the head restraint up against the resist‐
2. Press the button, arrow 1, and pull the head
restraint out completely.
Proceed in the reverse order to install the head
Rear head restraints
A missing protective effect due to removed or
not correctly adjusted head restraints can
cause injuries in the head and neck area. There
is a risk of injury.
▷ Before driving, install the removed head
restraints on the occupied seats.
▷ Adjust the head restraint so its center sup‐
ports the back of the head at as close to
eye level as possible.
▷ Adjust the distance so that the head re‐
straint is as close as possible to the back
of the head. Adjust the distance via the
backrest tilt as needed.
Seats, mirrors, and steering wheel
Online Edition for Part no. 01402896703 - X/18