Secure the vehicle against rolling away, for in‐
stance with a wheel chock, after existing the ve‐
After a power failure
To reestablish parking brake functionality after a
1. Switch on standby state.
Pull the switch while stepping on the
brake pedal or selector lever position P is set
and then push.
This process may take a few seconds. Any
sounds associated with this are normal.
The indicator light is no longer illumi‐
nated as soon as the parking brake is
ready for operation again.
Turn signal, high beams,
Turn signal in exterior mirror
When driving and during operation of the turn
signals or hazard warning system, do not fold in
the exterior mirrors, so that the signal lights on
the exterior mirror are easy to see.
Using turn signals
Press the lever past the resistance point.
Triple turn signal activation
Lightly tap the lever up or down.
The triple turn signal duration can be adjusted.
1. "My Vehicle"
2. "Vehicle settings"
4. "Exterior lighting"
5. "One-touch turn signal"
6. Select the desired setting.
The setting is stored for the driver profile cur‐
Press the lever to the resistance point and hold it
there for as long as you want the turn signal to
High beams, headlight flasher
Push the lever forward or pull it backward.
▷ High beams on, arrow 1.
The high beams light up when the low beams
are switched on.
▷ High beams off/headlight flasher, arrow 2.
Online Edition for Part no. 01402896703 - X/18