Displays in the instrument
The selector lever position is dis‐
played, for example P.
Electronic unlocking of the
Electronically unlock the transmission lock to
maneuver vehicle from a danger area.
Unlocking is possible, if the starter can spin the
Before unlocking the transmission lock, set the
parking brake to prevent the vehicle from rolling
Engaging selector lever position N
Press and hold down brake pedal.
2. Press the Start/Stop button. The starter must
audibly start. Hold the Start/Stop button
3. With your free hand, press the button on the
selector lever, arrow 1, and press the selector
lever into selector lever position N and hold,
arrow N, until selector lever position N is dis‐
played in the instrument cluster.
A Check Control message is displayed.
4. Release Start/Stop button and selector lever.
5. Release brake, as soon as the starter stops.
6. Maneuver the vehicle from the danger area
and secure it against moving on its own.
For additional information, see the chapter on
tow-starting and towing, refer to page 348.
Launch Control enables optimum acceleration
on surfaces with good traction under dry sur‐
The use of Launch Control causes premature
component wear since this function represents a
very heavy load for the vehicle.
Do not use Launch Control during the break-in,
refer to page 270, period.
Do not steer the steering wheel when driving off
with Launch Control.
Launch Control is available when the engine is at
operating temperature. The engine is at operat‐
ing temperature after an uninterrupted trip of at
least 6 miles/10 km.
Start with launch control
Switch on drive-ready state.
TRACTION is displayed in the instrument
cluster and the indicator light for DSC OFF
3. Engage selector lever position S.
4. With the left foot, forcefully press down on
5. Press and hold down the accelerator pedal
beyond the resistance point at the full throttle
Online Edition for Part no. 01402896703 - X/18