2021 BMW X3 Owner's Manual (Page 276 of 422)

2021 BMW X3 Owner's Manual
Posted on 13 Apr, 2021
Model: 2021 BMW X3
Pages: 422
File size: 7 MB

Get Manual

Online Viewer
Reprogramming individual
buttons
1. Switch on standby state.
2. On the rear-view mirror, press and hold the
button being programmed.
3. After approximately 20 seconds, when the
LED on the rear-view mirror starts to flash or‐
ange, release the button.
4. Hold the hand-held transmitter of the system
you wish to operate approximately 2.5 to
30 cm, 1 to 12 in away from the buttons on
the rear-view mirror. The distance required
depends on the hand-held transmitter.
5. Press and hold the button of the desired
function on the hand-held transmitter.
6. The LED can illuminate in various ways.
The LED is illuminated green: the pro‐
gramming process is complete.
Release the button.
The LED flashes rapidly: the hand-held
transmitter has been detected, but pro‐
gramming is not complete.
Press and hold the button on the rear-
view mirror for 2 seconds, then release.
Repeat this process three times to com‐
plete programming.
If the integrated universal remote control
is still not operational, continue from Spe‐
cial instruction for alternating-code radio
systems.
The LED does not flash green after
60 seconds: programming could not be
completed.
Repeat steps 3 to 6.
If the programming process is not complete, the
previous programming will be retained.
Operation
WARNING
Parts of the body can be trapped when operat‐
ing radio-controlled systems with the
integrated universal remote control, for example
garage door. There is a risk of injury or material
damage. During programming and operation,
make sure that the area of movement of the
system concerned is kept clear. Also follow the
safety notes supplied with the hand-held trans‐
mitter.
The system, for example the garage door, can be
operated using the button on the rear-view mir‐
ror when drive-ready state or standby state is
switched on. To do this, press and hold the but‐
ton within the reception range of the system until
the function is triggered. The LED on the rear-
view mirror illuminates continuously when the
radio signal is being transmitted.
Deleting saved functions
All saved functions are deleted. It is not possible
to delete functions individually.
Simultaneously press and hold the two outer
buttons on the rear-view mirror for approximately
10 seconds until the LED flashes green rapidly.
Sun visor
Glare protection
Fold the sun visor downwards or upwards.
Protection from glare at the side
Folding out
1.
Fold down the sun visor.
2. Unhook the sun visor from its holder and
pivot it sideways to the side window.
Seite 276
CONTROLS
Interior equipment
276
Online Edition for Part no. 01405A10E96 - VI/20


General
Year 2021
Make BMW
Model X3
Language English
Pages 422
Filetype PDF (Download)
File size 7 MB
2021 BMW X3 Manuals

Privacy Policy    Contact us