Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed un-
til the month in the bottom
display line 3 starts to flash.
Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed until
the year in the bottom display
line 3 starts to flash.
Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed until
the year no longer flashes.
Setting is complete.
In order to cancel the setting
at any point, keep button 1
pressed until the initial value
is shown again.
NOTICE
If you drive off before the setting
has been completed, the setting
will be cancelled.
Customising the display
with Pro onboard computer
OE
Switching on ignition ( 44).
In the customisation menu, it is
possible to set which informa-
tion is to be displayed in which
display line.
In the SETUP menu, select
the menu item SETUP BC
BASIC.
Briefly press button 1 to start
the customisation menu.
SETUP BC CUSTOM ap-
pears on the display.
Briefly press button 1 again to
exit the customisation menu.
NOTICE
If SETUP BC BASIC is selec-
ted, then the factory setting will
be active again. The customisa-
tion CUSTOM remains stored.
4
55
z
Operation