
101
edge of the foot plate 1 and upper edge
of the running board 2.
Adjusting the foot plate ( 101).
Adjusting the foot plate
ATTENTION
Unintentional actuation of the gearshift
lever
Damage to the transmission
Check for the correct setting of the
gearshift lever.
Ensure that the gearshift lever bears no
load when not in the process of gear
shifting.
Loosen screw 1.
Turn the foot plate 2 into the desired posi-
tion.
Tighten screw 1.
Foot plate eccentric on gearshift
lever
M6 x 25
6 lb/ft (8 Nm)
Observe the minimum distance D of min
1 in (min 25 mm) between the lower
edge of the foot plate 1 and upper edge
of the running board 2.