
134 MAINTENANCE
Removing the front wheel
Place the motorcycle on an auxiliary stand.
Mounting the rear-wheel stand ( 127).
Slacken clamping bolts on the left 1 and
right 2.
Raise front of motorcycle until the front
wheel can turn freely.
Attaching front wheel stand ( 127).
Remove cable tie 2.
Remove screws 3.
Loosen the left-hand brake caliper 1.
Remove screws 2.
Loosen the right-hand brake caliper 1.
Push the brake pads 1 apart slightly by
turning the brake caliper 2 against the
brake disc 3.
ATTENTION
Unintentional pressing together of brake
pads
Component damage when mounting the
brake caliper or when pressing the brake
pads apart
Do not actuate the brakes with the
brake caliper removed.
ATTENTION
Using hard or sharp-edged objects near
the component
Component damage
Do not scratch components, if necessary
tape off or cover.