
136 MAINTENANCE
Lubricate the contact surface on the
spacer bushing 1.
Lubricant
Optimoly TA
Insert the spacer bushing 1 into the wheel
hub on the left side with the collar facing
outward.
ATTENTION
Front wheel installation opposite the
running direction
Accident hazard
Observe running direction arrows on tire
or rim.
ATTENTION
Improper installation of the front wheel
Damage to the wheel speed sensor
When rolling in the front wheel, pay at-
tention to the wheel speed sensor.
Roll the front wheel into the front
suspension.
Lubricate the quick-release axle 1.
Lubricant
Optimoly TA
WARNING
Improper installation of quick-release
axle
Loosening of the front wheel
After the brake caliper is fastened and
the spring fork is relaxed, tighten the
quick-release axle and axle clamping
with the specified torque.
Lift the front wheel and install the quick-
release axle 1.
Remove front wheel stand and firmly com-
press front forks. Do not actuate the brake
at the same time.
Attaching front wheel stand ( 127).
Install screw 1. Brace quick-release axle
on the right side at the same time.