Turning off the ignition ( 45).
Press button 1 on the radio-operated key
Activation takes approximately 30 seconds
Turn signals flash twice.
Confirmation tone sounds twice (if pro-
DWA is armed.
To deactivate the tilt sensor (for example,
if the motorcycle is being transported on a
train and the train's movements could trig-
ger the alarm signal), press the button 1
on the radio-operated key again during the
Turn signals flash three times.
Confirmation tone sounds three times (if
Tilt sensor is deactivated.
The DWA alarm signal can be triggered by:
Tilt alarm sensor
Switch-on attempt with an unauthorized
Disconnecting the DWA from the vehi-
cle battery (DWA battery takes over the
power supply – alarm tone only, hazard
warning lights do not flash).
If the DWA battery is discharged, all func-
tions remain operational; the only difference
is that the alarm cannot be triggered if the
system is disconnected from the vehicle bat-
The duration of the alarm signal is approx.
26 seconds. During the alarm, an alarm tone
sounds and the turn signals blink. The type
of alarm tone can be set by an authorized
BMW Motorrad retailer.
A triggered alarm signal can be canceled
at any time by pressing the button 1 of the
radio-operated key without deactivating the
If an alarm signal has been triggered while
the motorcycle was unattended, the rider is
notified accordingly by an alarm tone sound-
ing once when the ignition is turned on. The
indicator light in the instrument cluster then
signals the reason for the alarm signal for