Apply brake lever 1 or footbrake lever
firmly and then release again.
is displayed in green.
Hill Start Control is activated.
To turn off the Hill Start Control, actuate
the brake lever 1 or the footbrake lever
Alternatively, ride off in 1st or 2nd gear.
Hill Start Control is deactivated auto-
matically when driving off or when the
reverser is activated.
disappears after the brake has been
Hill Start Control is deactivated.
For more information on Hill Start Con-
trol, see Chapter "Technology in detail"
The following prerequisites must be fulfilled
to use the reverser:
Motorcycle is standing.
Engine is running.
Brake is actuated.
Transmission is in Neutral.
Side stand is folded in.
Clutch is not pulled.
Reversing should be done without a passen-
On downhill gradients, the reverser is not
able to provide any holding function as is the
case when a gear is engaged.
The reverser cannot be used on gradients
above max 20 %.
Turn the selector lever 1 to the R position.
Gear display 2 switches from N to R.
The reverser can be used as soon as the R
display stops blinking.
To reverse, press and hold starter but-