
60 OPERATION
Automatic cancellation
Reversing is canceled automatically:
if the gradient is too steep
if there is an obstacle
if the reversing motor overheats
if the side stand is folded out
if the brake is applied
R will blink in the display if reversing is can-
celed.
Deactivating reverser
Turn the selector lever 1 to the F position.
Depending on the inclination of the
road, tension can be generated in the
drivetrain. The selector lever may be very
difficult to move.
To relieve pressure on the drivetrain, acti-
vate the front wheel brake and compress
the front wheel springs by pressing the
handlebars forward.
Turn the selector lever 1 to the F position.
Gear display 2 switches from R to N.
HEATING
Operating heated grips
The heated grips option can only be
activated when the engine is running.
The increase in power consumption
caused by the heated grips can drain
the battery if you are riding at low engine
speeds. If the battery is inadequately
charged, the heated grips are switched off
to ensure starting capability.
Starting the engine ( 105).
Go to the Settings, Heating menu and
select the Heated handlebar grips
menu item.
The grips have five-level heating. The fifth
level is used for fast heating of the grips; the
switch should then be switched back to one
of the lower levels.
Select the desired heating level.
The selected heating level 1 and the heated
grip icon 2 are shown in the display.
Operating the rider's seat heater
Seat heating can be activated only
when the engine is running.
Starting the engine ( 105).
Go to the Settings, Heating menu,
then select the Seat heating menu
item.