2022 Chevrolet Silverado 2500HD Owner's Manual (Page 141 of 441)

2022 Chevrolet Silverado 2500HD Owner's Manual
Posted on 11 Aug, 2021
Model: 2022 Chevrolet Silverado 2500HD
Pages: 441
File size: 14 MB

Get Manual

Online Viewer
Chevrolet Silverado 2500 HD/3500 HD Owner Manual (GMNA-Localizing-U.
S./Canada/Mexico-15546003) - 2022 - CRC - 5/5/21
140 Lighting
for an additional 10 minutes. To keep the
lamps on for more than 10 minutes, the
ignition must be on or in ACC/ACCESSORY.
K : If equipped, turns on the task
lighting. See Task Lighting 0 144.
IntelliBeam System
If equipped, this system turns the vehicle's
high-beam headlamps on and off according
to surrounding traffic conditions.
The system turns the high-beam headlamps
on when it is dark enough and there is no
other traffic present.
This light
b comes on in the instrument
cluster when the IntelliBeam system is
enabled.
Turning On and Enabling IntelliBeam
To enable the IntelliBeam system, press
b on the turn signal lever when it is
dark outside and the exterior lamp control is
in AUTO or
2.
Driving with IntelliBeam
The system only activates the high beams
when driving over 40 km/h (25 mph).
The blue high-beam on light appears on the
instrument cluster when the high beams
are on.
There is a sensor near the top center of the
windshield that automatically controls the
system. Keep this area of the windshield
clear of debris to allow for best system
performance.
The high-beam headlamps remain on, under
the automatic control, until one of the
following situations occurs:
.
The system detects an approaching
vehicle's headlamps.
.
The system detects a preceding vehicle's
taillamps.
.
The outside light is bright enough that
high-beam headlamps are not required.
.
The vehicle's speed drops below 20 km/h
(12 mph).
.
The IntelliBeam system is disabled by the
button on the turn signal lever. If this
happens, press
b on the turn signal
lever when the exterior lamp control is in
the AUTO or
2 position to reactivate the
IntelliBeam system. The instrument
cluster light will come on to indicate the
IntelliBeam system is reactivated.
The high beams may not turn off
automatically if the system cannot detect
another vehicle's lamps because of any of
the following:
.
The other vehicle's lamps are missing,
damaged, obstructed from view,
or otherwise undetected.
.
The other vehicle's lamps are covered
with dirt, snow, and/or road spray.
.
The other vehicle's lamps cannot be
detected due to dense exhaust, smoke,
fog, snow, road spray, mist, or other
airborne obstructions.
.
The vehicle's windshield is dirty, cracked,
or obstructed by something that blocks
the view of the light sensor.
.
The vehicle is loaded such that the front
end points upward, causing the light
sensor to aim high and not detect
headlamps and taillamps.


General
Year 2022
Make Chevrolet
Model Silverado 2500HD
Language English
Pages 441
Filetype PDF (Download)
File size 14 MB

Privacy Policy    Contact us