Chevrolet Spark Owner Manual (GMNA-Localizing-U.S./Canada-15540556) -
2022 - CRC - 4/9/21
Vehicle Care 183
4. Pull the bulb (2) straight out of the
5. Push the new bulb into the socket.
6. Install the bulb socket (3) by turning
clockwise into the license plate lamp
7. Replace the license plate lamp assembly
by using the two screws to secure.
Electrical System Overload
The vehicle has fuses and circuit breakers to
protect against an electrical system
When the current electrical load is too
heavy, the circuit breaker opens and closes,
protecting the circuit until the current load
returns to normal or the problem is fixed.
This greatly reduces the chance of circuit
overload and fire caused by electrical
Fuses and circuit breakers protect power
devices in the vehicle.
If there is a problem on the road and a fuse
needs to be replaced, the same amperage
fuse can be borrowed. Choose some feature
of the vehicle that is not needed to use and
replace it as soon as possible.
To check a fuse, look at the band inside the
fuse. If the band is broken or melted,
replace the fuse. Be sure to replace a bad
fuse with a fuse of the identical size and
Replacing a Blown Fuse
1. Turn off the vehicle.
2. Locate the fuse puller in the engine
compartment fuse block.