2022 Chevrolet Spark — Owner's Manual – Page #24

Posted on 11 Aug, 2021
Model: 2022 Chevrolet Spark
Pages: 271
File size: 7 MB

Download from Chevrolet.com

Online Viewer
Chevrolet Spark Owner Manual (GMNA-Localizing-U.S./Canada-15540556) -
2022 - CRC - 4/19/21
Keys, Doors, and Windows 23
Power windows work when the ignition is
on, in ACC/ACCESSORY, or when Retained
Accessory Power (RAP) is active. See
Retained Accessory Power (RAP) 0 138.
Using the window switch, press to open or
pull to close the window.
The windows may be temporarily disabled if
they are used repeatedly within a
short time.
Window Lockout
This feature stops the rear door passenger
window switches from working.
Press Z to engage the rear window
lockout feature.
Press Z again to disengage.
Window Express Movement
All windows can be opened without holding
the window switch. Press the switch down
fully and quickly release to express open the
If equipped, pull the window switch up fully
and quickly release to express close the
Briefly press or pull the window switch in
the same direction to stop that windows
express movement.
Window Automatic Reversal System
The express-close feature will reverse
window movement if it comes in contact
with an object. Extreme cold or ice could
cause the window to auto-reverse. The
window will operate normally after the
object or condition is removed.
Automatic Reversal System Override
If automatic reversal system override is
active, the window will not reverse
automatically. You or others could be
injured and the window could be
Warning (Continued)
damaged. Before using automatic reversal
system override, make sure that all
people and obstructions are clear of the
window path.
When the engine is on, override the
automatic reversal system by pulling and
holding the window switch if conditions
prevent it from closing.
Programming the Power Windows
Programming may be necessary if the
vehicle battery has been disconnected or
discharged. If the window is unable to
express-up, program each express-close
1. Close all doors.
2. Turn the ignition on or to ACC/
3. Partially open the window to be
programmed. Then close it and continue
to pull the switch briefly after the
window has fully closed.
4. Open the window and continue to press
the switch briefly after the window has
fully opened.

Use of Cookies    Contact us