
Chevrolet Spark Owner Manual (GMNA-Localizing-U.S./Canada-15540556) -
2022 - CRC - 4/9/21
58 Seats and Restraints
area if it interferes with the
attachment of the top tether to the
top tether anchor.
2.3. Route, attach, and tighten the top
tether according to your child
restraint instructions and the
following instructions:
If you are using a single tether in
an outboard seating position and
the head restraint has been
removed, route the tether over the
seatback.
If you are using a dual tether in an
outboard seating position and the
head restraint has been removed,
route the tether over the seatback.
If the rear outboard seating position
you are using has an adjustable
head restraint and you are using a
single tether, raise the head
restraint and route the tether under
the head restraint and in between
the head restraint posts.
If the rear outboard seating position
you are using has an adjustable
head restraint and you are using a
dual tether, raise the head restraint
and route the tether under the
head restraint and around the head
restraint posts.
If the child restraint is installed next
to a center seat, make sure the top
tether does not interfere with the
center seating position shoulder
belt/retractor. If it does, find
another suitable seating position to
install the child restraint.
3. Before placing a child in the child
restraint, make sure it is securely held in
place. To check, grasp the child restraint
at the LATCH path and attempt to move