2008 Dodge Avenger Owner's Manual (Page 358 of 467)

2008 Dodge Avenger Owner's Manual
Posted on 19 May, 2015
Model: 2008 Dodge Avenger
Pages: 467
File size: 7 MB

Get Manual

Online Viewer
3. There are two front jacking locations and two rear
jacking locations on each side of the body as shown.
CAUTION!
Do not attempt to raise the vehicle by jacking on
locations other than those indicated in step 3.
4. Turn the jack screw to the left until the jack can be
placed under the jacking location. Once the jack is
positioned, turn the jack screw to the right until the jack
head is properly engaged with the lift area closest to the
wheel to be changed. Do not raise the vehicle until you
are sure the jack is securely engaged.
WARNING!
Raising the vehicle higher than necessary can make
the vehicle less stable. It could slip off the jack and
hurt someone near it. Raise the vehicle only enough
to remove the tire.
5. Raise the vehicle by turning the jack screw to the right,
using the swivel wrench. Raise the vehicle only until the
tire just clears the surface and enough clearance is
obtained to install the spare tire. Minimum tire lift
provides maximum stability.
6. Remove the wheel nuts, and pull the wheel and wheel
covers (where applicable) off the hub. Install the spare
wheel and wheel nuts with the cone shaped end of the
nuts toward the wheel. Lightly tighten the nuts. To avoid
the risk of forcing the vehicle off the jack, do not tighten
the nuts fully until the vehicle has been lowered.
356 WHAT TO DO IN EMERGENCIES


General
Year 2008
Make Dodge
Model Avenger
Language English
Pages 467
Filetype PDF (Download)
File size 7 MB


Table of Contents

Privacy Policy    Contact us