Manual Description
The codes of the keys missing during the programming procedure will be erased to ensure that any lost key can not start the engine. The engine can be started with the side stand down and the gearbox in neutral. The system is hydraulically operated and you just need to pull the lever gently.
Turn the key counter clockwise to the original position and remove it. Do not leave the helmet attached when riding the motorcycle; it could interfere with your movements and cause loss of control of the motorcycle. Do not park on soft or pebbled ground or on asphalt melt by the sun heat and similar or the motorcycle may fall over.
Allow some time for oil to be heated and reach all points that need lubricating. Pull the clutch before the motorcycle stops to of a lockup disappears. Braking is one of the most difficult and does not control both the front and rear brake at and dangerous moments when riding a two wheeled the same time.
Manual Cover
General