2007 GMC Yukon XL Denali Owner's Manual (Page 172 of 608)

2007 GMC Yukon XL Denali Owner's Manual
Posted on 10 Apr, 2020
Model: 2007 GMC Yukon XL Denali
Pages: 608
File size: 3 MB

Get Manual

Online Viewer
Programming Universal Home
Remote Rolling Code
Rolling code garage door openers are used for
garage doors produced after 1996 and are
code protected. Rolling code means the coded
signal is changed every time your remote control
garage door opener is used.
Programming a rolling code garage door opener
involves time-sensitive actions, so read the
entire procedure before you begin. If you do not
follow these actions, the device will time out
and you will have to repeat the procedure.
Follow these steps to program up to
three channels:
1. Make sure that your key is in the
ACCESSORY position and the engine is off
while programming the transmitter.
2. Press the two outside buttons at the same
time for one to two seconds, and immediately
release them.
3. Go to the garage. Locate the garage door
motor head and press and release the
“learn” button.
After pressing the “learn” button, you have
10 to 30 seconds to complete Step 4
depending on your garage control unit. If you
cannot locate the “learn” button, refer to
the owners guide for your garage door opener.
172


General
Year 2007
Make GMC
Model Yukon XL Denali
Language English
Pages 608
Filetype PDF (Download)
File size 3 MB

Privacy Policy    Contact us