2011 Harley-Davidson Electra Glide Ultra Limited Owner's Manual (Page 125 of 169)

2011 Harley-Davidson Electra Glide Ultra Limited Owner's Manual
Posted on 15 Mar, 2016
Model: 2011 Harley-Davidson Electra Glide Ultra Limited
Pages: 169
File size: 4 MB

Get Manual

Online Viewer
1. Left side adjuster
2. Right side adjuster
Headlamp Adjusters: Dual Headlamp Models
Auxiliary Lamps
For models equipped with auxiliary lamps, see a Harley Davidson dealer or service manual for
bulb replacement or alignment.
Turn Signal Bulb Replacement: Bullet Style
1. See Lens Cap Notch. Insert a coin or the blade of a small screwdriver into the notch at the
bottom of the lens cap. Carefully twist until the lens cap pops out of the lamp housing.
2. Push bulb in and rotate counterclockwise. Pull bulb from socket.
3. Inspect condition of electrical contacts in socket. If necessary, clean with a small wire brush
and electrical contact cleaner.
4. Coat base of new bulb with ELECTRICAL CONTACT LUBRICANT (Part No. 99861 02).
5. Align pins on bulb with pin guides in bulb socket. Push new bulb in and turn clockwise to
lock in place.
6. Snap lens cap back into the lamp holder. Rotate lens to position notch at bottom of lamp.
Be sure that all lights and switches operate properly
before operating motorcycle. Low visibility of rider can
result in death or serious injury. (00316a)
7. Turn ignition on and test for proper operation.
Lens Cap Notch


General
Year 2011
Make Harley-Davidson
Model Electra Glide Ultra Limited
Language English
Pages 169
Filetype PDF (Download)
File size 4 MB

Privacy Policy    Contact us