2011 Harley-Davidson Electra Glide Ultra Limited Owner's Manual (Page 135 of 169)

2011 Harley-Davidson Electra Glide Ultra Limited Owner's Manual
Posted on 15 Mar, 2016
Model: 2011 Harley-Davidson Electra Glide Ultra Limited
Pages: 169
File size: 4 MB

Get Manual

Online Viewer
1. Run lifting strap rearward, first down the center of the battery tray, then up and across the
frame crossmember.
2. Place the battery into the battery tray, terminal side forward.
Connect the cables to the correct battery terminals. Failure
to do so could result in damage to the motorcycle
electrical system. (00215a)
Connect positive (+) battery cable first. If positive (+) cable
should contact ground with negative ( ) cable connected,
the resulting sparks can cause a battery explosion, which
could result in death or serious injury. (00068a)
Do not over tighten bolts on battery terminals. Use
recommended torque values. Over tightening battery
terminal bolts could result in damage to battery terminals.
(00216a)
3. Connect battery positive cable (red) to battery positive (+) terminal. Tighten bolt to 60 70 in
lbs (6.8 7.9 Nm).
4. Connect battery negative cable (black) to battery negative ( ) terminal. Tighten bolt to 60 70
in lbs (6.8 7.9 Nm).
Keep battery clean and lightly coat terminals with
petroleum jelly to prevent corrosion. Failure to do so could
result in damage to battery terminals. (00217a)
5. Apply a light coat of petroleum jelly or ELECTRICAL CONTACT LUBRICANT, (Part No.
99861 02) (1 oz tube), to both battery terminals.
6. See Move Top Caddy Aside. Fold lifting strap (2) forward over top of battery.
7. See Top Caddy. Rotate top caddy into position above battery and engage latch on hold
down bracket.
8. If equipped, engage HFSM antenna (2) and purge solenoid (1) on top caddy. Verify all other
connectors and harnesses are routed below the purge solenoid mounting tongue.
9. Fasten top caddy to frame crossmember. Tighten screws (4) to 72 96 in lbs (8.1 10.9 Nm).
10. Secure harnesses to frame with cable ties (3).
After installing seat, pull upward on seat to be sure it is
locked in position. While riding, a loose seat can shift
causing loss of control, which could result in death or
serious injury. (00070b)
11. Install seat.


General
Year 2011
Make Harley-Davidson
Model Electra Glide Ultra Limited
Language English
Pages 169
Filetype PDF (Download)
File size 4 MB

Privacy Policy    Contact us