Online Viewer
Manual Description
Rear Air Suspension. All models feature airadjustable rear suspension. Air pressure in the rear shock absorbers may be adjusted to suit load requirements, riding style and personal comfort. 1. Remove the left saddlebag, if present.
2. See Rear Air Suspension Air Valve. Remove the cap from the air valve located behind the shock absorber on the left side of the vehicle. NOTES: Always add 35 psi 2135 kPa to the existing pressure before releasing air from the system to prevent oil for exiting the air valve. NEVER exceed 50 psi 345 kPa.
Do not exceed maximum GVWR or GAWR. 3. Refer to Recommended Suspension Air Pressure: FLHR, FLHRC, FLTRX, FLHX and Recommended Suspension Air Pressure: FLHTC, FLHTCU, FLHTK, FLTRU. Attach AIR SUSPENSION PUMP AND GAUGE HD34633 to the air valve. Fill or release air from the shock absorber to the pressure specified for your model motorcycle and load.
NOTE: The specified pressures are recommended starting points. Adjust pressure to suit load conditions, riding style and comfort desired. Less pressure does not necessarily result in a softer ride. Using pressures outside the recommended loading range will result in a reduction of available suspension travel and reduced rider comfort.
4. Install cap on air valve and install left saddlebag, if removed.
Manual Cover
General