2016 Harley-Davidson Harley-Davidson Street 750 Owner's Manual (Page 35 of 117)

2016 Harley-Davidson Harley-Davidson Street 750 Owner's Manual
Posted on 15 Mar, 2016
Model: 2016 Harley-Davidson Harley-Davidson Street 750
Pages: 117
File size: 2 MB

Get Manual

Online Viewer
After a tip over, reset the ignition before starting the engine.
1. Set the motorcycle upright.
2. Reset the ignition by turning the ignition switch OFF IGNITION.
Shifting Gears
Finding Neutral
NOTE:
If the gears do not disengage when the engine is off, with the clutch engaged rock the motorcycle
backward and forward while pressing or lifting the shift lever.
Neutral is between first and second gear. Select neutral by either a half lift from first gear or a half
press from second gear.
Starting from a Stop
The clutch must be fully disengaged before attempting a
gear shift. Failure to fully disengage the clutch can result
in equipment damage. (00182a)
NOTE:
Partially open the throttle so the engine does not drag when the clutch lever is released.
1. With the engine running and the jiffy stand retracted, squeeze the clutch lever in against the
handlebar grip to disengage the clutch.
NOTE:
Always start forward motion in first gear.
2. Press the gear shift lever down to end of its travel and release. The transmission is now in
first gear.
3. Ease out the clutch lever and at the same time, gradually open the throttle.
Upshift (Acceleration)
NOTE:
Disengage the clutch completely before each gear change.
See Upshift Pattern. Shift to the next higher gear when the motorcycle reaches the shifting
speed. Refer to Recommended Upshift Speeds.
1. Close the throttle.
2. Slowly pull clutch hand lever in against handlebar grip to fully disengage clutch.


General
Year 2016
Make Harley-Davidson
Model Harley-Davidson Street 750
Language English
Pages 117
Filetype PDF (Download)
File size 2 MB

Privacy Policy    Contact us