2007 Harley-Davidson Night Rod Special Owner's Manual (Page 24 of 140)

2007 Harley-Davidson Night Rod Special Owner's Manual
Posted on 15 Mar, 2016
Model: 2007 Harley-Davidson Night Rod Special
Pages: 140
File size: 3 MB

Get Manual

Online Viewer
help is found.
Indicator Lamps: VRSC Models
See Indicator Lamps: VRSC Models. Ten indicator lamps are provided.
The two green TURN indicator lamps flash when turn signals are activated; therefore,
flashing indicates the chosen turn direction. When the 4 way hazard flashers are operating,
both turn indicators flash simultaneously.
The blue HIGH BEAM indicator lamp, when lit, signals high beam headlamp operation.
The green NEUTRAL lamp, when lit, signals the transmission is in neutral gear.
The red OIL PRESSURE indicator lamp, when lit, signals that oil is not circulating through
the engine.
The red ENGINE COOLANT TEMPERATURE indicator lamp, when lit, signals the coolant
temperature has exceeded 243° F (117° C).
The red ENGINE DIAGNOSTIC indicator lamp, when lit, signals that the vehicle's computer
has detected an engine malfunction.
The red ALTERNATOR indicator lamp, when lit, signals there is a malfunction in the
charging circuit and the battery is not being properly charged.
The red SECURITY STATUS indicator lamp indicates the status of the vehicle's security
system. It is normal for this to light with or without a security system.
The yellow LOW FUEL indicator lamp, when lit, signals the fuel tank is almost empty.
NOTES:
The OIL PRESSURE indicator lamp will glow when the ignition is turned on prior to starting
the engine. With the engine running, the lamp should be off when engine speed is above
idle.
To learn more about the SECURITY STATUS indicator lamp, see the H D Factory Security
Section later in this manual.
Several other circumstances that could cause the red oil pressure indicator lamp to illuminate
include:
An insufficient or diluted oil supply causing the oil pressure indicator lamp to remain lit at
speeds above idling.
An oil feed clogged with ice and sludge in freezing weather, preventing oil circulation.
A grounded oil signal switch wire.
A faulty oil signal switch.
A damaged or improperly installed check valve.
Trouble with the oil pump.
If the oil pressure indicator lamp remains lit, always check
the oil supply first. If the oil supply is normal and the lamp
is still lit, stop the engine at once and do not ride further
until the trouble is located and the necessary repairs are
made. Failure to do so may result in engine damage.
(00157a)
Several other circumstances that could cause the red engine coolant temperature indicator lamp
to illuminate include:


General
Year 2007
Make Harley-Davidson
Model Night Rod Special
Language English
Pages 140
Filetype PDF (Download)
File size 3 MB

Privacy Policy    Contact us