1. Transmission drain plug (right side)
2. Engine oil drain plug and O ring
3. Hex plug (do not remove)
Oil Pan
Primary Chaincase Lubricant
General
NOTE:
The chaincase lubricant level should be drained and refilled at specified intervals. Refer to
Regular Service Intervals: 2012 Touring Models.
Check Lubricant Level
1. Ride motorcycle until engine is warmed up to normal operating temperature.
2. Stand vehicle upright on a level surface, so that primary chaincase is level.
3. See Primary Chaincase Cover. Remove clutch inspection cover from primary chaincase
cover.
4. Remove and discard seal ring from cover.
5. If the fluid level is visible through the clutch inspection cover opening, it is adequate. If
necessary, add enough of the recommended GENUINE Harley Davidson lubricant until it is
visible along the bottom portion of the clutch assembly. Refer to Recommended
Lubricant.
6. Refer to Changing Chaincase Lubricant to install seal ring and clutch inspection cover.
Do not overfill the primary chaincase with lubricant.
Overfilling can cause rough clutch engagement,