2012 Harley-Davidson Road Glide Custom Owner's Manual (Page 76 of 175)

2012 Harley-Davidson Road Glide Custom Owner's Manual
Posted on 15 Mar, 2016
Model: 2012 Harley-Davidson Road Glide Custom
Pages: 175
File size: 4 MB

Get Manual

Online Viewer
Press and hold the INT button on the front panel, to open the Intercom Setup display.
See D in Display Examples. To activate the intercom (INT) and the VOX microphones, press
soft key 1 to turn the intercom ON.
The intercom will activate in Intercom Setup with VOX sensitivity and headset volume level
settings from the previous use. VOX sensitivity and headset volume are adjusted in Int Setup
only.
To exit Int Setup, press and release the MODE SEL switch or the INT button.
To make adjustments to VOX sensitivity after exiting Intercom Setup, re enter Intercom Setup by
pressing INT.
NOTE:
For privacy, the intercom can only be heard through the headsets.
To turn OFF the intercom and the VOX microphones, press the INT button to open the Intercom
Setup display and press the On/Off soft key (1).
Adjusting VOX Sensitivity
VOX sensitivity should be adjusted so that the microphones break VOX at a normal voice level.
Enter Intercom Setup by pressing the INT button. Press the ON or 1 soft key to turn the intercom
on.
See G in Display Examples. Press the MODE SEL switch UP or DN or press the 4 or 5 soft key
to initiate the VOX display. The LCD displays VOX sensitivity as a bar graph with a smaller bar to
indicate the center of the 14 bars. A higher number of bars indicates greater sensitivity while a
lower number means less sensitivity.
Continue to use MODE SEL on the right hand grip to adjust the sensitivity level. Press MODE
SEL UP to make the microphone more sensitive. Press the MODE SEL DN to reduce sensitivity.
To exit Setup, press and release the MODE SEL switch.
NOTES:
The receiver retains the sensitivity level from the previous setup. However, if power is
removed from the receiver, VOX sensitivity defaults to mid level.
VOX sensitivity may have to be adjusted if either microphone is unintentionally activated
because the microphone misinterprets radio, road or background sound as conversation.
When VOX is set to its maximum, the microphone is always open. The VOX display will read
Open.
When VOX is set to lowest value, the microphone is closed and the VOX display reads Closed.
Adjusting Rider Headset Volume
The rider intercom volume is only adjustable in Intercom Setup.
See E in Display Examples. Enter Intercom Setup, speak into microphone and adjust the
intercom volume with the AUDIO switch on the left hand grip. Press AUDIO + to raise the volume
and AUDIO to lower the volume. The LCD displays a dashed line that changes length with the
level.
See F in Display Examples. When the headset volume has been adjusted to the bottom of its
range, Mute will appear in the volume display.
To exit Intercom Setup, press and release the MODE SEL switch.


General
Year 2012
Make Harley-Davidson
Model Road Glide Custom
Language English
Pages 175
Filetype PDF (Download)
File size 4 MB

Privacy Policy    Contact us