2005 Harley-Davidson Sportster 1200 Custom Owner's Manual (Page 27 of 141)

2005 Harley-Davidson Sportster 1200 Custom Owner's Manual
Posted on 14 Mar, 2016
Model: 2005 Harley-Davidson Sportster 1200 Custom
Pages: 141
File size: 2 MB

Get Manual

Online Viewer
group. See Starting the Engine: Carbureted Models for detailed operation procedures.
1. Put the engine off/run switch in the RUN position and the transmission in neutral. Neutral
(green) indicator lamp should be illuminated.
2. See Ignition/Headlamp Key Switch: Sportster Models. Turn ignition/headlamp key
switch to ON and push the START switch to operate starter motor.
Engine OFF/RUN Switch
See Handlebar Controls. The engine off/run switch (7) turns the ignition power ON or OFF. The
engine off/run switch is located on the right handlebar control. Push the top portion of the engine
off/run switch to turn off ignition power and shut the engine off. Push the bottom portion of the
engine off/run switch to turn on ignition power.
NOTES:
The engine off/run switch must be in the ON position to start or operate the engine.
The engine off/run switch should be used to shut the engine off.
1. To shut the engine off, push the top of the off/run switch to the ignition OFF position.
2. See Ignition/Headlamp Key Switch: Sportster Models. Turn the ignition key to the
OFF position to turn the ignition power completely OFF.
Throttle Control Grip
See Handlebar Controls. The throttle control grip (9) is located on the right handlebar control
and is operated with the right hand.
To reduce rider fatigue on long trips, a spring loaded throttle friction adjustment screw (10) is
located at the bottom of the throttle grip clamp on non-cruise equipped models.
1. Slowly turn throttle control grip clockwise (toward the front of the bike) to close the throttle
(decelerate).
2. Slowly turn throttle control grip counterclockwise (toward rear of bike) to open the throttle
(accelerate).
Do not tighten throttle friction adjustment screw to the
point where the engine will not return to idle automatically.
Over-tightening can lead to loss of vehicle control, which
could result in death or serious injury. (00031b)
3. Unscrew the throttle friction adjustment screw so the throttle returns to the idle position
when the hand is removed from the grip.
4. Screw the throttle adjustment screw in to increase friction on grip. This provides a damping
effect on throttle motion.


General
Year 2005
Make Harley-Davidson
Model Sportster 1200 Custom
Language English
Pages 141
Filetype PDF (Download)
File size 2 MB

Privacy Policy    Contact us