See OPERATING RECOMMENDATIONS section. Do not
operate the engine above maximum safe RPM as shown
under OPERATION (red zone on tachometer). Lower the
RPM by upshifting to a higher gear or reducing the amount
of throttle. Failure to lower RPM may cause equipment
damage. (00159a)
The tachometer (if applicable) registers the engine speed in revolutions per minute (RPM).
Trip Odometer
Use the trip-odometer A or trip-odometer B to register number of miles/kilometers traveled on a
trip or between refueling.
Odometer will display mileage when bike is OFF when function switch is pressed. There is no
need to turn the bike on to check the odometer reading.
Never attempt to tamper with or alter the vehicle odometer.
This is illegal. Tampering with or altering a vehicle
odometer may cause equipment damage. (00160a)
Tip Indicator Lamp
If tip occurs, check all controls for proper operation.
Restricted control movement can adversely affect the
performance of the brakes, clutch or ability to shift, which
could result in loss of vehicle control and death or serious
injury. (00350a)
Should motorcycle be tipped over, the word "tip" will appear in the odometer window. Engine will
not start until reset. To reset, cycle ignition/headlamp key switch ON-OFF-ON.