2006 Harley-Davidson Street Bob (EFI) Owner's Manual (Page 101 of 126)

2006 Harley-Davidson Street Bob (EFI) Owner's Manual
Posted on 15 Mar, 2016
Model: 2006 Harley-Davidson Street Bob (EFI)
Pages: 126
File size: 2 MB

Get Manual

Online Viewer
Explosive hydrogen gas, which escapes during charging,
could cause death or serious injury. Charge battery in a
well ventilated area. Keep open flames, electrical sparks
and smoking materials away from battery at all times.
KEEP BATTERIES AWAY FROM CHILDREN. (00065a)
Harley Davidson motorcycles have a 12 Volt battery. Be
sure the booster vehicle has a 12 Volt system. Failure to
do so could result in vehicle damage. (00220a)
NOTE:
This procedure presumes the BOOSTER battery is in another vehicle.
1. Turn off all unnecessary lamps and accessories.
Positive Cable
2. See Jump Start Cable Connections. Connect one end of a jumper cable to the
DISCHARGED battery positive (+) terminal (1).
3. Connect the other end of the same cable to the BOOSTER battery positive (+) terminal (2).
Negative Cable
Do not connect negative ( ) cable to or near the discharged
battery negative ( ) terminal. Doing so could cause a spark
and explosion, which could result in death or serious
injury. (00073a)
4. Connect one end of a jumper cable to the BOOSTER battery negative ( ) terminal (3).
Do not connect the negative ( ) cable to painted or chrome
parts. Doing so could result in discoloration at the
attachment point. (00221a)
5. Connect other end of the same cable (4) to a safe ground, (away from the DISCHARGED
battery).
6. Start motorcycle.
7. Disconnect cables in reverse order of steps 2, 3, 4, 5. That is: steps 5, 4, 3, 2.


General
Year 2006
Make Harley-Davidson
Model Street Bob (EFI)
Language English
Pages 126
Filetype PDF (Download)
File size 2 MB
2006 Harley-Davidson Street Bob (EFI) Models

Privacy Policy    Contact us