2009 Harley-Davidson Street Glide Owner's Manual (Page 30 of 186)

2009 Harley-Davidson Street Glide Owner's Manual
Posted on 15 Mar, 2016
Model: 2009 Harley-Davidson Street Glide
Pages: 186
File size: 3 MB

Get Manual

Online Viewer
damage. (00159a)
See Indicator Lamps: Touring Models. The tachometer measures the engine speed in
revolutions per minute (RPM).
Tip Indicator Lamp
If tip occurs, check all controls for proper operation.
Restricted control movement can adversely affect the
performance of the brakes, clutch or ability to shift, which
could result in loss of vehicle control and death or serious
injury. (00350a)
Should motorcycle be tipped over, the word "tip" will appear in the odometer window. Engine will
not start until reset. To reset, cycle ignition/headlamp key switch ON OFF ON.
Fuel Gauge
The fuel gauge indicates the approximate amount of fuel in the fuel tank(s) and is located to left of
the speedometer or on the left front panel of the fairing.
NOTE:
The FLHR left side fuel cap is a fuel gauge only. Do not remove.
Oil Pressure Gauge (FLHT/FLTR/FLHX)
The oil pressure gauge indicates engine oil pressure and is found on the front panel of the fairing.
Engine oil pressure will normally vary from 5 psi (34 kN/m2) at idle speed to 30 38 PSI (207 262
kN/m2) at 2000 RPM when engine is at normal operating temperature of 230° F (110° C).
Voltmeter (FLHT/FLTR/FLHX)
The voltmeter indicates electrical system voltage and is found on the front panel of the fairing.
With the engine running above 1500 RPM, the voltmeter should register 13 14.5 volts with battery
at full charge.
Air Temperature Gauge (FLHT/FLTR/FLHX)
The air temperature gauge indicates the ambient air temperature in degrees Fahrenheit. This
gauge is found on the front panel of the fairing.
Fuel Range Function
The fuel range function shows the approximate mileage available with the amount of fuel left in


General
Year 2009
Make Harley-Davidson
Model Street Glide
Language English
Pages 186
Filetype PDF (Download)
File size 3 MB

Privacy Policy    Contact us