2014 Harley-Davidson Street Glide Special Owner's Manual (Page 86 of 177)

2014 Harley-Davidson Street Glide Special Owner's Manual
Posted on 15 Mar, 2016
Model: 2014 Harley-Davidson Street Glide Special
Pages: 177
File size: 4 MB

Get Manual

Online Viewer
2. See Right Handlebar Controls. With the security system fob present, turn the off/run
switch to RUN position.
NOTE:
The engine lamp will light for approximately 4 seconds and you will hear the fuel pump purr
for approximately 2 seconds as it operates to fill the fuel lines with gasoline.
3. Raise the jiffy stand (required on international models).
4. Squeeze the clutch lever in against the handgrip. Shift transmission to neutral.
NOTE:
To activate the starting system, the clutch interlock circuitry requires that the clutch be
disengaged. The clutch lever must be pulled in against the left handlebar grip and/or the
transmission must be shifted to the neutral position (with the green neutral lamp lit). Apply
the brake to prevent movement of the motorcycle.
5. Press the starter button to start the motorcycle.
6. When the engine has started, you can operate your motorcycle as you normally would after
raising the jiffy stand.
NOTE:
The ABS indicator lamp will remain on until vehicle is moving approximately 3 mph 5 km/h .
1. Engine off/run switch
2. Engine start switch
Right Handlebar Controls
Starting after Tip Over
If tip occurs, check all controls for proper operation.
Restricted control movement can adversely affect the
performance of the brakes, clutch or ability to shift, which
could result in loss of vehicle control and death or serious
injury. (00350a)


General
Year 2014
Make Harley-Davidson
Model Street Glide Special
Language English
Pages 177
Filetype PDF (Download)
File size 4 MB

Privacy Policy    Contact us