2012 Harley-Davidson Switchback Owner's Manual (Page 99 of 152)

2012 Harley-Davidson Switchback Owner's Manual
Posted on 15 Mar, 2016
Model: 2012 Harley-Davidson Switchback
Pages: 152
File size: 3 MB

Get Manual

Online Viewer
proceeding. (00251b)
NOTE:
Make note of components during disassembly to aid in correct assembly.
1. Remove main fuse. See Fuses
2. See Headlamp Bulbs: Single Headlight. Remove trim ring hardware (1). Remove trim
ring (2).
3. Remove mounting ring (3) and bumper, if equipped.
4. Disconnect headlamp connector (8) from bulb (5).
5. Remove rubber boot (6), if equipped, from back of headlamp lens (4).
6. Remove wire retaining clip (7) from headlamp base.
7. Remove bulb from headlamp assembly.
8. For International Models Only: Rotate boot (10) one quarter turn and remove bulb
assembly from housing. Pull position bulb (9) to remove from boot.
Bulb Installation
Never touch the quartz bulb. Fingerprints will etch the
glass and decrease bulb life. Handle the bulb with paper or
a clean, dry cloth. Failure to do so could result in bulb
damage. (00210b)
NOTE:
When installing a new bulb, be sure connector contacts are clean for good electrical contact.
1. Install new bulb and assemble the headlamp components.
2. For International Models Only: Install new bulb in boot. Install boot in housing and rotate
one quarter turn.
3. Verify slots and tabs in headlamp and trim ring are aligned.
4. Install rubber boot with word TOP at the top of the headlamp lens assembly.
5. Connect the headlamp connector.
6. Install bumper, if equipped.
7. Install trim ring and hardware.
8. Install main fuse.


General
Year 2012
Make Harley-Davidson
Model Switchback
Language English
Pages 152
Filetype PDF (Download)
File size 3 MB

Privacy Policy    Contact us