1. Capacity
2. Months of stand
3. Measured at 105 F (40 C)
4. Measured at 77 F (25 C)
Effective Rate of Temperature on Battery
Self discharging Rate
Battery: VRSC Models
Disconnection and Removal
Before you can inspect or disconnect the battery you must read the section containing information
about air cleaner removal.
1. Remove the air cleaner. See Air Cleaner: VRSC Models.
2. See Removing Rear Breather Hose Clamp. Compress hose clamp with a needle nose
pliers and remove rear breather hose from cam cover.
3. See Velocity Stacks. Slide the o ring (4) up each velocity stack (1) body to reveal the three
retaining fasteners (5). Unscrew the fasteners and lift off the velocity stacks.
Cover the injector intakes with duct tape to prevent objects
from falling down the injector bore. Do NOT use shop
cloths or objects that could damage the injector
butterflies. (00212a)