(See BATTERY
DISCONNECTS AND
CONFIGURING section)
American/Domestic
configuration TSSM
3 flashes Netherlands
configuration TSSM (Dealer
configurable only)
4 flashes international
configuration TSSM
3 Press and hold key fob
button until confirmation is
received
1 flash turn signals &
indicators
4 Press left turn switch 1
time and release
Turn signals & indicators flash
to indicate the current option
selected
1 flash extremely low
2 flashes low sensitivity
3 flashes medium sensitivity
4 flashes high sensitivity
5 Press and release left
turn switch to advance
through options
Turn signals & indicators flash
to indicate the new option
selected
1 flash extremely low
2 flashes low sensitivity
3 flashes medium sensitivity
4 flashes high sensitivity
6 Turn IGN key OFF
Storage Mode Configuration
The security system has a special mode for long term storage. This mode prevents the security
system from discharging the battery after a period of days without any ignition key switch activity.
Refer to Storage Mode Options.
If the security system is set to infinite, the system will not go into storage mode. In this case,
the customer must use a trickle charger to keep the battery from discharging after 60 days
of storage.
Vehicles will enter storage mode whether the security system is armed or disarmed.
In storage mode, all alarm functions are suspended and the receiver is shut down and will not
respond to the key fob. The vehicle is immobilized because the starter motor and Ignition/EFI
controllers are disabled. When the storage mode is entered, the security lamp stops flashing to
conserve power.
To wake up the security system from storage mode, the ignition key must be turned ON. This will
trigger the alarm if the system was previously armed. You must use the key fob or personal code
to disarm the system and stop the alarm.
If the ignition is switched from ON OFF quickly, then the security system will wake up without
activating the alarm.
To set the storage mode preferences, refer to Storage Mode Configuration.