2006 Harley-Davidson VRSCA V-Rod Owner's Manual (Page 80 of 138)

2006 Harley-Davidson VRSCA V-Rod Owner's Manual
Posted on 15 Mar, 2016
Model: 2006 Harley-Davidson VRSCA V-Rod
Pages: 138
File size: 3 MB

Get Manual

Online Viewer
radiator cover side trim. Gently pull the bottom of the side trim outward, lift up on the
trim to detach it from its upper attachment point and remove it from the motorcycle.
b. See Rear Brake Master Cylinder Reservoir: VRSCR Model. Verify the fluid level
in the rear brake master cylinder reservoir is 1/2 in. (12.7 mm) below the top of the
reservoir, as viewed through the translucent plastic case of the reservoir.
c. If the level is low, clean all dirt and debris from the reservoir cover. Remove the two
reservoir cover screws and remove the cover. Add D.O.T. 4 HYDRAULIC BRAKE
FLUID (Part No. 99953 99A) which is available from a Harley Davidson dealer.
Replace the reservoir cover and cover fasteners. Tighten the fasteners to 6 8 in lbs
(0.68 0.90 Nm).
d. Carefully reinstall the radiator cover side trim and fastener. Tighten the fastener to
26.5 35.3 in lbs (3 4 Nm).
2. Check the fluid level in the front brake master cylinder reservoir.
a. Stand the motorcycle upright (not leaning on the jiffy stand) on a level surface, so the
top of the front brake master cylinder is level.
b. See Handlebar Controls: VRSC Models. Clean all dirt and debris from the front
brake master cylinder cover. Remove the two master cylinder cover screws and
remove the cover.
c. Verify the fluid level in the front brake master cylinder reservoir is 1/5 in. (5 mm) below
the reservoir top. If the fluid level is low, add D.O.T. 4 HYDRAULIC BRAKE FLUID
(Part No. 99953 99A) which is available from a Harley Davidson dealer.
d. Replace reservoir cover and cover fasteners. Tighten fasteners to 6 8 in lbs (0.8 1.2
Nm).
NOTE:
Use only D.O.T. 4 HYDRAULIC BRAKE FLUID (Part No. 99953 99A) approved for brake
system use and available from a Harley Davidson dealer.
D.O.T. 4 brake fluid will damage painted and body panel
surfaces it comes in contact with. Always use caution and
protect surfaces from spills whenever brake work is
performed. Failure to comply can result in cosmetic
damage. (00239b)
Inspect brake pads for wear at service maintenance
intervals. If you ride under adverse conditions (steep hills,
heavy traffic, etc.), inspect more frequently. Excessively
worn brake pads can lead to brake failure, which could
result in death or serious injury. (00052a)
3. Check the brake discs for wear.


General
Year 2006
Make Harley-Davidson
Model VRSCA V-Rod
Language English
Pages 138
Filetype PDF (Download)
File size 3 MB
2006 Harley-Davidson VRSCA V-Rod Models

Privacy Policy    Contact us