113
uuIndicatorsu
Continued
Indicator Name On/Blinking Explanation Message
Safety Support
Indicator
(Amber)
• Comes on when RDM, Low Speed
Braking Control
*
, and/or CMBS
TM
shuts itself off.
• Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
• Have your vehicle checked by a dealer if
the indicator and message are still
displayed even after you have cleaned the
area around the camera.
2 Front Sensor Camera P. 499
• Comes on when mud, snow, or ice
accumulates in the vicinity of sonar.
• Remove the obstacle in the vicinity of the
sonar sensor.
2 Low Speed Braking Control
*
P. 459
2 Sonar Sensors
*
P. 502
• Comes on when mud, snow, or ice
has accumulated in the vicinity of
the blind spot information system
sensor.
• Comes on while driving - Something
may be interfering with the blind spot
information system sensor. Check the
vicinity of the blind spot information
system sensor and remove any obstacles.
2 Blind spot information System
*
P. 443
• Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.
• Make sure the total load is within the
Maximum Load Limit.
2 Maximum Load Limit P. 413
—
Models with Low Speed Braking Control
Models with blind spot information
system
* Not available on all models
22 ACCORD 4D US HEV MAP-31TWA6400.book 113 ページ 2021年7月26日 月曜日 午前10時51分