558
uuReplacing Light BulbsuTaillights, Brake Lights
*
, and Back-Up Light Bulbs
Taillights, Brake Lights
*
, and Back-Up Light Bulbs
When replacing, use the following bulbs.
1. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
2. Turn the socket counter-clockwise and
remove it.
3. Remove the old bulb and insert a new bulb.
Taillight: LED
Brake Light
*
: LED
Back-Up Light: 16 W
1Taillights, Brake Lights
*
, and Back-Up Light Bulbs
Taillights and brake lights
*
are LED type. Have an
authorized Honda dealer inspect and replace the light
assembly.
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Insert the clip with the pin raised, and push until it is
flat.
Push until the
pin is flat.
* Not available on all models
22 ACCORD 4D US HEV MAP-31TWA6400.book 558 ページ 2021年7月26日 月曜日 午前10時51分