uuFusesuInspecting and Changing Fuses
Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK (0
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
u If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a burned out fuse, remove it
with the fuse puller and replace it with a
*1: Models with the smart entry system have an ENGINE START/STOP button
instead of an ignition switch.
1Inspecting and Changing Fuses
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
Replace fuse with a spare fuse of the same specified
Confirm the specified amperage using the charts on
P. 503 to 504.
Use the charts to locate the fuse in question and
conform the specific amperage on the fuse label.
2 Fuse Locations P. 503
There is a fuse puller on the back of the engine
compartment fuse box cover.
15 CR-V-31T0A6300.book 505 ページ ２０１５年２月２日 月曜日 午前１０時３５分