*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
Comes on when you turn the ignition
switch to ON (w
, and goes off
when the engine starts.
Comes on if there is a problem with
the EPS system.
Stays on constantly or does not come on
at all - Have your vehicle checked by a
2 If the Electric Power Steering (EPS)
System Indicator Comes On P. 501
Low Tire Pressure/
Comes on for a few seconds when
you turn the ignition switch to ON
May come on for a few seconds
again if the engine is not started for
several tens of seconds with the
ignition switch in ON
Comes on when:
- One or more tires’ pressures are
determined to be significantly low.
- The system has not been calibrated.
Comes on while driving - Stop in a safe
place, check tire pressures, and inflate the
tire(s) if necessary.
Stays on after the tires are inflated to
the recommended pressures - The system
needs to be calibrated.
2 TPMS Calibration P. 401
Blinks for about one minute, and
then stays on if there is a problem
with the TPMS, or when a compact
spare tire is temporarily installed.
Blinks and remains on - Have your vehicle
checked by a dealer. If the vehicle is fitted
with a compact spare, get your regular tire
repaired or replaced and put back on your
vehicle as soon as you can.
* Not available on all models
15 CR-V-31T0A6300.book 76 ページ ２０１５年２月２日 月曜日 午前１０時３５分